Anyway back to todays post, I have my very first cube finish to show off. I have seen lots of this type of finish around on other blogs and just love it. I have been wanting to try one myself for a while now, so I finally took the plunge and used my Bent Creek Bird Seed finish, posted here, to try it out. I had checked out a few posts showing how to put these together in the past, so I had a good idea of what I needed to do to complete it.
 |
| Bent Creek Bird Seed Cross Stitch - Cube Finish |
I had two styrofoam blocks I had bought some time ago in my stash. One of these was too big for this project so I used the smaller one. Unfortunately it was too deep, so I ended up cutting it in half with a bread knife. Not the easiest thing I have ever done but it worked. Next time I think I will raid my partner's toolbox and use his saw. Also I will do it outside and not in our kitchen on the chopping board!
I searched through my stash of fabrics and selected a few different ones, before I settled on a tan piece with white polkadots. I pinned the cross stitch to the styrofoam block using flat headed pins, and did the same for the backing fabric. The back of the block was uneven from being cut, so I pinned a piece of batting to the back of the cube under the fabric to even it out.
 |
| Cross Stitch Cube Finish - Back |
I used a strip of the same tan fabric to cover the sides and top of the cube. I wanted it to go all the way around but alas I didn't have a long enough piece, so I folded in the edges at the bottom and pinned them in place. The whole thing is finished off with a wide green and narrow tan ribbon.
I'm delighted with how this turned out, it was actually a relatively simple finish. There are a few things I would change the next time I make one of these. I would add in a piece of batting to the front under the stitching, as it adds a bit of dimension to the piece. Also the stitching on the front is slightly tilted, so on the next one I will have to make sure it is straight when pinning it in place. I think it just needed to be stretched slightly to get it to sit properly.
I'm really looking forward to doing more of these cube finishes. The next one I have in mind is the Soda Stitch Harvest of Love, seen here, and I think I have the perfect fabric for it but will have to wait and see. Does anyone have any tips or tricks for these finishes, anything you do differently? If you haven't done one before would you like to try it out? Let me know in the comments below!
That's all for now!
